TAG Precision—American-made RMR Plate for Kimber
For users of optics-ready Kimber 1911 and 2K11 pistols, TAG Precision has announced…
For users of optics-ready Kimber 1911 and 2K11 pistols, TAG Precision has announced…
Fountain Valley, CA—SureFire, LLC, manufacturer of the world’s finest—and most innovative—illumination tools and…
Shinenyx—creators of a cutting-edge fusion of digital night vision and thermal imaging technology—has…
All shooting is a balance between speed and precision. By that I mean you can…
The Mod-Navy Qual I’ve been doing this qual (or drill, or whatever the current nom…
• Built for road trips and off-road use• Manual transmission equipped• Wrapped in MultiCam Arctic…
An Aero Precision rifle has successfully completed a series of rigorous testing procedures required to meet National Institute of Justice (NIJ) standards for law enforcement. Following that process, the rifle was evaluated with a 10,000-round endurance test.
The weapon experienced zero malfunctions during the 10,040 round NIJ assessment, even in extreme conditions that fall outside normal use.

The evaluation process was conducted by a West Coast law enforcement agency and included the following phases:

• Initial 60-round test fire sequence
• 12 hour Freezer period with subsequent 30-round test fire
• 12 hour Oven period (120° Fahrenheit) with subsequent 30-round test fire
• Water submersion with subsequent 30-round test fire
• Sand submersion with subsequent 30-round test fire
• Six (6) position drop test with five (5) rounds fired after each drop.1
• Initial zero with optic and iron sights2
• Final zero conducted with 3-round zeroing shots near the end of the endurance test with an acceptable zero of 2.75 in.

• The test consisted of 10,000 rounds fired in 1,000 round increments.
• The rifle was cleaned and lubricated prior to the beginning of the test.
• It was subsequently lubricated in 1000-round intervals.
• The firing schedule for this rifle consisted of 150-180-round increments from various shooting positions and firing rates.
• There was an 8-12 round cooldown period between firing cycles utilizing a 4’x4′ industrial fan.
• The gas rings of the rifle were replaced at 6,040 rounds.
• A final zeroing test was conducted at around 9,960.

The Aero Precision rifle completed both the NIJ Standards and Endurance Test with zero (0) operational problems.

1The charging handle lever on the port side broke during the drop testing sequence and the flash-hider and pistol group came loose. None of these issues impacted how the rifle functioned. Loosened parts were re-tightened.
2The T&E optic failed during the drop test; no effect on the rifle test. A second T&E optic also failed. A third T&E optic was used during the endurance firing sequence.
Aero Precision
Instagram
Facebook
YouTube
Stay up to date, check out all the latest news.
Want more posts like this one? Subscribe to Guns & Tactics to receive email updates and special offers direct to your inbox!
Social Links:
– The views and opinions expressed on this web site are solely those of the original authors and contributors. These views and opinions do not necessarily represent those of Guns & Tactics, the administrative staff, and/or any/all contributors to this site.
– Affiliate Disclaimer: Guns and Tactics is reader/viewer supported. This post may contain affiliate links and we may earn a small commission when you click on the links at no additional cost to you. As an Amazon Affiliate I earn from qualifying purchases.
[mc4wp_form id=”30235″]
It is with a degree of sadness that after 10 years of attendance, we have decided to end our presence at SHOT SHOW in Las Vegas, NV.
[dcs_img_center framed=”no” w=”600″ h=”418″] http://gunsandtactics.wpengine.com/wp-content/uploads/2013/02/atn-600-418.jpg [/dcs_img_center] [dcs_post_top] [dcs_fancy_header color=”#000000″ fweight=”bold”]The Odin Thermal Imaging System, smallest on the market, now weapon and head mountable.[/dcs_fancy_header] [dcs_thinspliter size=”medium”] [dcs_img_right framed=”no” w=”150″…
This was a viewer request on how to clean your Glock Pistol. We don’t do white glove inspection cleanings generally for duty guns, so if you’re looking for…
Manufacture of fine firearms and accessories, Mesa Precision Arms announces the release of their Tikka T3 / T3x aluminum bottom metal.
SHOT Show made a triumphant return to Las Vegas last week, bringing industry professionals together for the first time in two years.
Jody Lewis goes one-to-one with Joel Allen to learn more about V7 Weapons Systems. I am always on the lookout for innovative companies in the firearms arena that…
© 2025 UN12 Magazine
© 2025 UN12 Magazine
Wait! Don’t forget to