Every Day Carry
Peeking into someone else’s everyday carry (EDC) setup is like getting a backstage…
Peeking into someone else’s everyday carry (EDC) setup is like getting a backstage…
Mesa Tactical, designer and manufacturer of quality tactical accessories and equipment for law…
Primary Arms’ (PA) new 21mm red dot sights are designed to combine cutting-edge…
The V Exercise was created for those who would like a continuous moving-and-shooting exercise that…
The tripod is the essential tool to allow the precise delivery of fire from any…
The skill of firing accurate rounds into a threat from retention is an underappreciated and…
CHICAGO, ILLINOIS (03/26/2020) – Tyrant Designs is proud to debut our NEW Glock 43X/48 +4 Magazine Extension! Utilizing our magazine extension technology, the Glock 43X/48 Magazine Extension is the FASTEST and EASIEST installing magazine extension ever! Add 4 Additional Rounds to your factory Glock magazine AND it includes a 10% Power Spring. Drop your mags faster, and more easily grab them with their machined and inlayed knurling!
We use our Retention Plunger Technology that allows the magazine extension to easily slide onto the bottom of your magazine! The entire install happens in 10 SECONDS or LESS and with no tools! Easily push the plunger down and slide the magazine base plate off!
Our magazine base pads are CNC machined from Aerospace Grade Aluminum. This gives any operator the added weight needed for your base pad to drop free and fast. Our magazine extensions instantly add 4 rounds to your Glock 43X/48 9mm.
As always, our products are manufactured in the USA and have a flawless finish. There is no easier or quicker way to add much-needed capacity to your slimline Glock than with our Glock 43X/48 +4 Magazine Extension!
Available in Black, Red, Grey, Blue, Gold, or Machined Aluminum for $39.95 with a Lifetime Warranty. No tools necessary and now available at www.tyrantcnc.com.
About Tyrant Designs
Tyrant Designs officially started in 2015, but the business has been around for almost 40 years. As a whole, Tyrant Designs and its other divisions of work, are a state-of-the-art CNC machining shop that performs work in the aerospace, medical fields, and now firearm industry.
What prompted Tyrant Designs to wade into manufacturing firearm components was one sour firearm purchase. After an expensive AR-15 was found to be flawed with an inferior and foreign-produced pistol grip, they believed there had to be a better grip available. Upon realizing nothing met their expectations of quality, Tyrant Designs sought out to make one themselves! Their passion for quality and better firearm components manifested into the skeletonized MOD Grip, and grew into the full-fledged firearm component business they are now today.
Everything they produce is American Made in the heartland of Chicago, Illinois with an enduring Lifetime Warranty. For more information, please visit us at: www.tyrantcnc.com.
Looking for more on all the latest? Check out our News section to catch up.
Want more posts like this one? Subscribe to Guns & Tactics to receive email updates and special offers direct to your inbox!
Guns & Tactics is an online media outlet that focuses on the firearms community, not just firearms and gear but also quality training, technical break downs and enlightening presentations.
In this video we review the CAP Sighhts from AmeriGlo. CAP sights are available for a wide variety of pistols, the Glock version are reviewed in the video….
Ever wonder what it’s like to get shot in the chest while wearing a bulletproof vest? If so, then you’re just the guy for our next set of…
Chris Tran introduces us to 212 Tactical Designs and the Tactical Belt Clip System Police officers in this day and age have an ever-growing responsibility towards the citizens…
[dcs_img_center framed=”no” w=”600″ h=”347″] http://gunsandtactics.wpengine.com/wp-content/uploads/2012/11/burris_full.jpg [/dcs_img_center] [dcs_post_top] [dcs_img_right framed=”black” w=”275″ h=”71″] http://gunsandtactics.wpengine.com/wp-content/uploads/2012/11/burris_logo.jpg [/dcs_img_right] GREELEY, Colo. – Burris is pleased to announce that the much anticipated Eliminator II and…
Chris chats with Greg about all things L2D Combat. Triggers, Slides, Laser Stippling, M&P Shield and more. *no that was not a live round that ejected L2D Combat
Bushnell has announced the introduction of a new EQL reticle option for both the Elite Tactical XRS3 6-36×56 FFP and DMR3 3.5-21×50 FFP.
© 2025 UN12 Magazine
© 2025 UN12 Magazine
Wait! Don’t forget to