Jacob Grey Firearms Nox 9—Precision, Control, Fits Like a Glove
More than 12 years in the making, Jacob Grey’s Nox 9 marks the…
More than 12 years in the making, Jacob Grey’s Nox 9 marks the…
Many Glock compensators rely on a set screw for attachment that can eventually…
According to the company, it has long been Griffin Armament’s belief that the…
• Built for road trips and off-road use• Manual transmission equipped• Wrapped in MultiCam Arctic…
I designed the Button Man to give shooters a low-round-count, low-light-engagement drill that involved both…
The V Exercise was created for those who would like a continuous moving-and-shooting exercise that…
How you outfit your vehicle for a day out at the range, a weekend off-roading on the trails, or for your daily commute can differ quite a bit. If you’re at the range, you will want to have your guns and gear laid out and ready to use. On the other hand, if you and your truck are climbing over rocks, you will want to have recovery gear ready—just in case. The layout and gear pretty much depends on your chosen activity. What doesn’t change is your need for a reliable method of storing and presenting it all.
Tactical Walls, makers of in-home firearm storage solutions, has invaded the automotive world by grafting their popular wall-mounted modular storage fixtures onto the tailgates of popular vehicles such as Jeep Wrangler and Toyota FJ Cruiser. The VMod system consists of a slotted VMod panel that mounts to your Jeep or FJ Cruiser’s tailgate interior and gives you the ability to have a modular storage solution to securely organize gear, tools, straps, firearms, and more, all mounted directly to the tailgate.
Compatible with accessories from Tactical Walls’ in-home ModWall system, VMod can be configured using any number of ModWall’s wide variety of gear mounting fixtures. For those who are not familiar with the ModWall system, the concept is simple. ModWall (and VMod) panels are made of sturdy, non-abrasive plastic and have slots cut into them that securely accept each ModWall fixture’s mounting screws. The fixture slides into position on the panel from either end.
Once mounted, the fixtures stay securely in place and can be used to mount any number or type of items. Removal or adjustment of the fixtures are just as simple; slide the fixure off, and you’re done. ModWall fixtures allow multiple items to be strapped in securely or mounted to a wide array of accessory fixtures, some of which are magnetic for even greater utility. Dedicated fixtures include rifle and pistol mounts, magazine mounts of all sizes, and even plate carrier and helmet mounts, too.
Installation of the VMod panel took us literally about five minutes on a Jeep Wrangler JK. Installation required removing a piece of interior trim from the tailgate and using a power screwdriver to drive eight self-tapping screws to hold the VMod panel in place. The panel slid into place on to its mounting bracket within seconds. Other than the holes made by the screws, which are in an area that would normally be hidden by the factory interior trim, nothing is permanent with this installation. After screwing the VMod panel into place on the tailgate, we slid a number of fixtures into place. This helped us create secure equipment mounts for our tools, guns, and gear.
This system allows you to not only configure the VMod panel to suit your mission requirements, but also swap out entire pre-outfitted VMod panels to fit your needs. You can prepare multiple panels with gear ready to go for any type of activity. For an all-day range day, have a panel configured with your shooting gear. Going fishing the next day? Swap out the range-day panel for your gone-fishin’ panel. It’s that easy.
The modular storage solution VMod brought our Jeep has been a godsend. To swing the tailgate open and have instant access to our most-used tools made us realize that this was a solution we didn’t know that we needed.
Additionally, in helping us eliminate tool bags and hard-sided cases, it helped us free up much-needed space for other cargo. The VMod system’s sheer modularity and breadth of various attachments makes it, frankly, fun to layout. Call us organizationally obsessed, borderline OCD. We’re confident if you get your own VMod system going, you’ll find yourself obsessively organizing your vehicular-borne gear as well.
The VMod system is available for Jeep Wrangler TJ, JL, JK and their Rubicon siblings, as well as Toyota FJ Cruiser. As we’ve come to expect from Tactical Walls, the system is made domestically in the United States and comes in a complete package that includes the VMod tailgate panel, base plate mounting bracket, and several ModWall fixtures to help get your organizing started.
Text by Martin Anders and images Courtesy of the Manufacturer
Tactical Walls
VMod
MSRP: $199
URL: tacticalwalls.com
This is Tenicor’s new appendix carry holster that accommodates installed weapon-mounted lights. It’s designed to universally accommodate a variety of popular compact lights (Streamlight TLR7, SureFire XC1-B and…
Designed by a former Tier 1 operator and combat tested and proven for more than 10 years, the Sherriff of Baghdad B-Sling features quick adjustment capability with intuitive…
Strike Industries has launched a new brand—Strike Arms—and has released its first serialized component: the Strike Arms Pistol (Compact) Frame. This is a striker-fired polymer frame designed to…
Compatible Glock, M&P, and Beretta magazines Fits in any MilSpec AR-15 lower Ergonomic magazine release button So you want to lob pistol caliber projectiles from your AR but…
You might be surprised to see just what items people carry on their person each and every day. That’s why it’s always interesting to see someone’s EDC loadout….
5.11 Tactical just announced new jackets with PrimaLoft Insulation. This insulation brings high quality and performance to the 5.11 style and brand. We’ve been using various 5.11 gear…
© 2025 UN12 Magazine
© 2025 UN12 Magazine
Wait! Don’t forget to