Strike Industries Comp QUAD & CIRCLE

OPTICS PLANET EXCLUSIVE!
Purchase the Strike Micro Threaded Comp – QUAD only at:
CLICK HERE – www.opticsplanet.com – CLICK HERE

The QUAD is a pistol compensator from the Strike Micro Threaded Comp (SMTC) line that can work with just about any size slide using a threaded barrel with 1/2″x28 Threads Per Inch (TPI). The wide front wall baffling redirects gas to mitigate felt recoil and reduce muzzle rise. SI internal testing has typically seen a reduction average range (dependent on application) of 15-30% in felt recoil. This QUAD version in the SMTC line has a built-in anti-rotation system using the front tip of the pistol guide rod for most applications other than pistols with a flush guide/recoil rod system. With the clamp style design on the SMTC QUAD, timing the comp is simple including a secure and tight fitment. Originally designed for smaller compact, sub-compact and micro sized pistols, the SI styling of this QUAD pairs aesthetically well with most OEM and aftermarket slides on the market including full size pistols. Made from S45C steel with HRC40-45 heat treatment and a black oxide finish, the Strike Micro Threaded Comp – QUAD offers a smaller threaded barrel compensator option for your pistol with SI style.

Product Features:
-Micro compensator that can work with just about any size slide using threaded barrel (1/2”-28 TPI)
-Built-in anti-rotation system using front tip of guide rod (when applicable)
-Wide front wall baffling redirects gas to mitigate felt recoil and reduce muzzle rise
-Secure tight fitment with easy timing clamp style design
-SI styling which matches most OEM and aftermarket slides on the market
-Designed to work with micro, sub-compact, compact and full size pistols
-Made from S45C steel with HRC40-45 heat treatment and black oxide finish

Package Contents:
-x1 Strike Micro Threaded Comp – QUAD
-x1 Set screw [M4x12mm]
-x1 Torx tool [T20]
-x1 Waning card

COMPATIBILITY:
-With any 1/2”x28 TPI threaded barrel
-Calibers: 9mm and .357 SIG
NOT COMPATIBLE: Built-in anti-rotation system may not work with pistols using flush guide/recoil rod systems
WARNING: Due to the reduction of slide energy, recoil spring tuning will be required when using this compensator
Torque: Set screw to exactly 40 in/lbs (4.5 Nm)
NOTE: Recommended to re-apply Loctite® Threadlocker Blue 243® anytime set screw is removed before reinstalling
DISCLAIMER: Always check with your state and local laws. We are not lawyers.

OPTICS PLANET EXCLUSIVE!
Purchase the Strike Micro Threaded Comp – CIRCLE only at:
CLICK HERE – www.opticsplanet.com – CLICK HERE

The CIRCLE edition pistol compensator from the Strike Micro Threaded Comp (SMTC) line can work with just about any size slide using a threaded barrel with 1/2″x28 Threads Per Inch (TPI). This simple and sleek CRICLE design is for those looking for a minimalist sized compensator that still redirects gas to mitigate felt recoil and reduce muzzle rise. SI internal testing has typically seen a reduction average range (dependent on application) of 8-15% in felt recoil. The included O-ring (with spares) is used to help time and retain the SMTC CIRCLE comp. Originally designed for smaller compact, sub-compact and micro sized pistols, the SI styling of the CIRCLE maintains fitment with your existing holster or majority of holsters on the market. On full size or any size pistols, consider it as also a thread protector with added muzzle control. Made from AISI 1144 steel bead blasted with Quench Polish Quench (QPQ) process finish, the Strike Micro Threaded Comp – CIRCLE is small and lightweight at only a total length of 16.3mm (0.64”) while redirecting gas for recoil reduction to keep you on target.

Product Features:
-Micro compensator that can work with just about any size slide using a threaded barrel (1/2”-28 TPI)
-O-ring used for timing and retaining compensator
-Minimalist design for fitment in most holsters on the market
-SI styling that is universal to almost all OEM and aftermarket slides on the market
-Designed to work with micro, sub-compact, compact and full size pistols
-Lightweight
-Made from AISI 1144 steel bead blasted with Quench Polish Quench (QPQ) process finish

Package Contents:
-x1 Strike Micro Threaded Comp – CIRCLE
-x3 O-ring

WARNING: For threaded barrels with no shoulder, the o-ring included with this compensator will not work and cannot be used to help with timing. Please use Loctite® Threadlocker Red to secure compensator to threaded barrel but apply an appropriate amount and not too much. Check this compensator as part of your routine maintenance. All installations must be done by a certified professional gunsmith only and properly tested to pass all safe and function tests.
COMPATIBILITY:
-With any 1/2”x28 TPI threaded barrel
-Calibers: 9mm and .357 SIG
WARNING: Due to reduction of slide energy, recoil spring tuning might be required when using this compensator
DISCLAIMER: Always check with your state and local laws. We are not lawyers.

---

Keep up on all the latest News.

Want more posts like this one? Subscribe to Guns & Tactics to receive email updates and special offers direct to your inbox!

Social Links:

• YouTube
• Instagram
• Facebook
• Twitter
• Full30
• Patreon

– The views and opinions expressed on this web site are solely those of the original authors and contributors. These views and opinions do not necessarily represent those of Guns & Tactics, the administrative staff, and/or any/all contributors to this site.

– Affiliate Disclaimer: Guns and Tactics is reader/viewer supported. This post may contain affiliate links and we may earn a small commission when you click on the links at no additional cost to you. As an Amazon Affiliate I earn from qualifying purchases.

---

[mc4wp_form id=”30235″]

---